2024C/2019C CAT Caterpillar ET Diagnostic Adapter III CAT ET 3 truck Diagnostic Tool With WIFI

CAT 2020-2024 software version include the 10 factory password generator. When you push the Ctrl+F2 shortcut button,then can open the 10 bits of the password generator.

Note: 
Buy our Caterpillar ET 2019C we send 14PIN cable free (which can support the part of new vehicles)

Top 5 Reasons To Get CAT Caterpillar ET Diagnostic Tool Adapter 3 
1. Software Version: 2024C /2019C (option)
2. Supported Operating System: Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit, Windows 11 64 bit, Windows 11 Pro 64bit.
3. We will activate it after installing 2024C/ 2019C version software.(After the installation , please contact us help you active the software by remote)
4. Supported Language: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
5. Make: Caterpillar
6. Region: WorldWide
7. Support WIFI

Caterpillar electronic technician 2024C (replaces CAT ET 2024A, 2023A, 2022C, 2022B, 2022A, 2021A, 2019C) with WinFlash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.

2024C Caterpillar Electronic Technician software With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2024.

Support car list of CAT Caterpillar ET Diagnostic Tool :
 
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas

Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground - Hard Rock
Underground - Longwall
Underground - Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers

With the CAT Diagnostic Tool, you can:
View active and logged diagnostics
View events where irregularities occurred and were logged by the ECM
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously
Record and log performance data
Graph a group of status parameters
View the current configuration of an ECM
Change ECM configurations
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results
For some machine and engine products, additional functionality has been included with the service tool program

Product Description 
CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the "ease of use." The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

CAT Caterpillar ET Diagnostic Tool enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.

Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
 Perform calibrations to enhance performance of the ECM.
 Customize the ECM with application-specific settings.
 Over 100 custom Diagnostic, Information and Service features including:
  - 2D and 3D Histogram plotting capability (engine software
    support required).
  - Custom Status screen groups
  - Snapshots (Download and display snapshot data recorded by the
    ECM)
  - Configuration Aid that allows upload/download of same
    configuration to multiple control modules

Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool's primary functions without connecting to ECM(s)
Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)

PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280x1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Wi-Fi (for the Wireless Comm Adapter 3)

Minimum Configurations
PC containing a Pentium 2 GHz processor or greater
1GB RAM
500MB of an available hard disk drive
CD-ROM drive
Super VGA monitor or display (1024x768)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

Package List:
Option 1:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2019C software DVD
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box

Option 2:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2024C software (download link)
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box

Option 3:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2024C software DVD
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box
8.1pc x Second Hand Laptop Lenovo X220 Laptop （Software installed and activated well ready to use）

The Second Hand Lenovo X220 Laptop:
Brand: Lenovo
Screen Size: 12.5
Memory: 4GB
Memory (RAM): Intel(R)Core(TM)I5 CPU
Type: Laptop/Notebook
Condition: Used
Processor Speed: 2.53GHz

Option 4:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2024C software DVD
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box
8.1pc x Second Hand Laptop Lenovo T450 Laptop （Software installed and activated well ready to use）

The Second Hand Lenovo T450 Laptop：
Specification:
Brand: Lenovo
Condition: Used
Type:Laptop/Notebook
Screen Size:12.5
Processor Type:Intel (R) Core(TM) I5-5200U CPU
Memory: 8GB

Option 5:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2024C software DVD
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box
8.1pc x Second Hand Panasonic CF19 Laptop（Software installed and activated well ready to use）

Second Hand Panasonic CF19 I5 4GB Laptop:
Model No: CF-19
Processor Type: Intel(R) Core(TM)I5 CPU i5-3320
Memory Size: 4096 MB
Available Memory: 3893 MB
Condition: Used

Option 6:
Package including:
1.CAT et3 Comm Adapter III
2.2PC x USB Cable(From device to your computer)
3.J1939/J1708 9PIN Cable
4.2024C software DVD
5.14PIN Cable(for new truck)(Optional)
6.WIFI adapter
7.Plastic box
8.1pc x Second-hand Panasonic FZ-G1 I5 4rd generation Tablet（Software installed and activated well ready to use）

Second Hand Panasonic FZ-G1 Configuration:
10.1" HD Screen
Intel Core i5-6300U Processor
8GB Memory
Windows 10 Pro (Refurbished)
Wifi
Display Resolution Maximum 1920 x 1200

What's New - Updates by Version
2024C
Automatic Connection Preferences
Users are now able to change multiple automatic connection preferences for the service tool and WinFlash. After navigating to the Preferences dialog, users may enable the service tool to connect automatically when opened in service and/or flash mode. Both options may also be disabled if the user wishes to connect manually.

2024B
No significant new features or feature enhancements

What’s New – 2024A
Automatic Product Status Report (PSR) Upload
The service tool includes a new tool that automatically uploads Product Status Reports.   The tool scans for newly generated Product Status Reports and uploads them when an internet connection is available.   The default is that automatic report uploading is enabled.   The Preferences dialog has an option to disable the tool.

What’s New – 2024A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the same time.   The service tool shows a message popup when the ECM is only detected on one link.   The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete.   Service tool features that display a connection icon also use a new icon for an incomplete connection.

What’s New – 2024A
No significant new features or feature enhancements

What’s New – 2024A
CEOS Fleet Configuration File TOP
A CEOS (Customer Electronic Option Selection) Fleet Configuration File can be created/modified for an engine using the Service Tool.   This is available in connected and disconnected mode.

Error When Launching Service Tool
There is a Microsoft issue with upgrading libraries during an installation involving certain versions of the C++ redistributable.   After a successful service tool installation, when trying to run the service tool for the first time, one of the following errors may occasionally appear: “The entry point could not be located in api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll is missing from your computer.”   If either of these messages is displayed, please let us know and we will send you to step by step troubleshooting guide.   This procedure requires administrator rights.

Service Tool License Corruption Issues with Windows 10 Updates
Windows 10 updates 1709 and 1803 will corrupt service tool licenses.   Future Window 10 updates may do the same

If either of license error messages is displayed, please let us know and we will send you to step by step troubleshooting guide.

What’s New – 2024A
Trainer Update – 988K XE Wheel Loader
The 988K XE Wheel Loader has been added to the Trainer application.

What’s New – 2024A
Preferences Option to Save a Product Status Report to PDF

The Preferences dialog for the Product Status Report has changed.    The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created.    The service tool will continue to automatically save Product Status Reports as an XML file.

What’s New – 2024A
Product Status Report Updates
The Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.
Winflash Screen Update
The screen for the Winflash feature has been updated.    A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash.    A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.

Communication Hardware
Caterpillar Communication Adapter III
Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
Step 1 Start Cat Electronic Technician.
Step 2 Click the Stop Connect button when it appears.
Step 3 Select the Utilities menu.
Step 4 Choose “Preferences > Modify...”.
Step 5 Select the Communications tab.
Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this check box to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality. The screen for the Winflash feature has been updated.    A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash.    A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.

User Comment(Total 6 User Comment Num)

• by shawn adams,May 28,2021
  

  Product compatible with description, fast delivery and very good contact with the seller.

  Reply #1 by Kelly May 29,2021
  Hello, Thank you so much for your feedback.If you have problem to use our tool, Please no hesitate to contact us.
  
  Kelly

  ---

• by Mikael Granqvist,Apr 23,2021
  

  It works. made qualitatively. no complaints. It remains to configure Wi-Fi

  Reply #1 by Kelly Apr 24,2021
  Hello, Thank you so much for your feedback.If you have problem to use our tool, Please no hesitate to contact us.
  
  Kelly

  ---

• by James Van Niekerk,Apr 02,2021
  

  It seems to be working fine, will test onsite with comms adapter
  
  Thank you, very much

  Reply #1 by Kelly Apr 03,2021
  Hello, Thank you so much for your feedback.If you have problem to use our tool, Please no hesitate to contact us.
  
  Kelly

  ---

• by Steven Nguyen,May 14,2020
  

  Not tried but good quality in terms of quality

  Reply #1 by Kelly May 15,2020
  Hello,
  Thank you for your support and feedback on our website.
  Any further questions please feel free to contact us.
  Best regards!
  
  Kelly

  ---

• by Omar Quintana,Apr 24,2020
  

  VERY GOOD ORDER AND FAST SHIPPING THANKS

  Reply #1 by Kelly Apr 25,2020
  Hello,
  Thank you for your support and feedback on our website.
  Any further questions please feel free to contact us.
  Best regards!
  
  Kelly

  ---

• by christopher horn,Jan 17,2020
  

  Merchant technical support is very good.

  Reply #1 by OBD2TOOL Jan 17,2020
  Thanks for your feedback.
  
  OBD2TOOL

  ---

Total 6 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: