New arrival TOYO KEY PRO OBD II Support Toyota 4080128 BIT

TOYO KEY PRO OBD II   Work Independently, No Need Connected with Other Device.

it Be suitable for 40/80/128 BIT (4D, 4D-G, 4D-H), support Toyota ID72(G)/8A(H) all key lost

Toyota OBD-Ⅱ operating steps：
1.Insert the key into the ignition lock. 
2.Plug the OBD-Ⅱ adapter  into the car 
3.When you hear continuous “beep” sound, remove the key , insert the key again.
4.When you hear“beep”sound twice,it means the first key match successful.At this immobilizer light is on all the time,it means entered the matching mode.
5.Remove the first key , then insert the keys which need to be matched one by one.
6.If the immobilizer light go out, that means all the work have done, you can start the car.
7.If the immobilizer light is on all the time, use any key on-off
it 5 times, finish matching.