What is New for New Design Autocom CDP Plus Pro

Compare with Autocom CDP+ 2012.02 and Autocom CDP+ 2012.03,what’s new for 2013.01 Vesion New Design Autocom CDP+ Pro ?

Please check detail below:

2013.01 Vesion New Design autocom cdp+ Pro don’t need to activation.The package will come with one dongle.You just need to connect the dongle when you install and run the software.

Autocom CDP+ CARS
New models

Volvo V4(12), Volkswagen Up, Seat Mii and Skoda Citigo are new models added in 2013 release 1. Another news in models are two electrical vehicle from Renault. The all new Twizy and the Kangoo ZE covers basic functions in most systems.
New functionality

Land Rover and Jaguar has been updated with new functionality across the model range.

Many additions

autocom cdp plus for cars & trucks 2013.01 offers a large number of new diagnostic functionality. More than 1100 systems in over 300 models has been updated with basic functions like fault code reading and erasing. Also more enhaced functionality like programmings and parameter setting are implemented.
GENERIC OBD

There has been an addition in the advanced mode with the functionality to read the IUPR (In-Use Performance Ratio) parameter in Diesel engines.

New types in the Vehicle selection

There is an addition of three new system types in the vehicle selection in the software. There has been a restructure of system types to easier find the system you are searching for. Suspension, Heating/Cooling and Electrical Vehicle has from now on separate system types.

Firmware
This firmware which is loaded in the VCI is from this release splitted into smaller sections to enable faster update of the VCI.

Autocom CDP+ TRUCKS
New structure
Autocom CDP+ 2013 Release 1 there has been an addition in the vehicle selestion. You can now select Generic Truck to access common systems sorted by manufacturer of the system rather than sorted by brand of vehicle.
New brand
Diagnostics for KAMAZ trucks has been added. This covers Engine, Brakes and Suspension Systems. There are new additional cables to access these systems.
New cables
A total of 5 new cables will be available from 2013 Release 1. 4 of those are Wabco and Knorr systems in Generic Truck and Kamaz. The final new cable is for Generic Bus, gearbox and door systems.
Trailer
The ECU exchange function for Wabco TEBS is added in the database. This function read the parameters in the existing ECU and configure the new ECU the same.
New types in the Vehicle selection
There is an addition of three new system types in the vehicle selection in the software. There has been a restructure of system types to easier find the system you are searching for. Suspension, Heating/Cooling and Electrical Vehicle has from now on separate system types.
Firmware
The firmware which is loaded in the VCI is from this ealease splitted into smaller sections to enable faster update of the VCI.

If you are prefer to buy Autocom CDP+ ,please check this link: http://www.obd2tool.com/goods-4458-+2013+release+1+new+design+Autocom+CDP+For+CarsTrucks+And+OBD2+version201301++With+Plastic+Box.html