Good news!!! Xtool X100 Pad 3 new test report: it has been tested to read Toyota 93C46 EEPROM Data Perfectly.
Here are the steps:
1.Connect the EEPROM chip to the EEPROM adapter, and then connect the main cable.
2.Connect the power supply, be sure to connect the power supply adapter before operating.
3.Click “Diagnosis”>>“Other service”>>“EEPROM adapter”, then the firmware will be downloaded.
4.Click “EEPROM Program”, and make sure the adapter is connected and powered and the status light is turned on. Then choose “OK.
5.Choose “93CXX series”>>“93C46”>>“Read EEPROM data”, and make sure the adapter is connected and powered and the status light is turned on. Then choose “OK.
6.Input the EEPROM file name, say, “Toyota 1” and save the EEPROM file, then exit.
7.Click “Report”>>“File Management”>>“Adapter”, then we can see the EEPROM file “Toyota 1”.
