CK100 key programmer add some car models support till 2014 year
Firstly, Prepared two keys, one key can start the engine, another one cannot (blank key) and
connected cable to the device.
Secondly, Connected obd2tool CK100 auto key programmer v45.6 device into the OBD socket.
Next, Turned on obd2tuning ck 100 pin code device.
Then, Inserted a key and turned the console.
Turned ignition on then removed the key.
After that, allowed to add a blank new key while left ignition off.
Waiting for 45 seconds (max 60 seconds) until the safety access procedure was completed.
Finally, blank key has been stored. Tried the second key and the engine can be started by the end.
