The steps to Install Driver and Configure for Openport 2.0 J2534

Openport 2.0 adapter is capable of communicating with most OBDII compliant vehicle with standard J2534.Here car-auto-repair.com show you guide on how to install and configure driver for Openport 2.0 J2534.

Preparations:
Openport 2.0 driver Free Download
Openport 2.0 adapter

Procedures:
Connect USB cable to laptop and Openport 2.0 adapter


Then your PC will prompt you find a unknown device
Go to “Device Manager” to check there with a yellow exclamation mark

Double click “openport2_setup_1024791.exe” from download link file
Click “Next” to continue

Click “I Agree”

Setup will install OpenPort 2.0 J2534 Drivers in the following folder.(Record the folder driver installed)
To install in a different folder, click “Browse” and select another folder
Here click “Next” to continue

Finish driver installation

Now back to “Device Manager”
Double click “OpenPort 2.0” with yellow exclamation mark

Click “Browse to select local driver”

Now here you need select the driver folder you install before (record before)
Then click “OK” to load driver

After then just wait process

Done

Now back “Device Manager” to check the status, the yellow exclamation mark disappear

Finish!

You can run related software for OpenPort 2.