KTAG – The Blog of www.obd2tool.com

Ktag 7.020 “Hardware configuration not supported” Solution

Some users feedback Ktag 7.020 pops up an error “Hardware configuration not supported“, for example when they read any of bosch

This instruction show you guide on how to use KTAG programmer to read data from Detroit DD15 ACM2 ECU data.

KESS V2 V5.017 Introduction: Kess V2 V5.017 can read and write ECU via OBD2 port directly, no need to disassemble

This is a Ktag help file used for Volvo Bosch EDC17 on GPT vehicles. To use this protocol of

New Russian KTAG 8.000 master, 111 New protocols &313 Updated protocols, is 441usd-337usd more expensive than Ktag 7.020 master, also

1. KESS V4.036 only supports car, KESS V5.017 can support car/truck/tractor/Bike ! And V4 support cars only untill 2014, but

Can support car / truck / tractor / bike! KESS V5.017 supports vehicle according to Motor. So V5.017 can support

KESS V2 V5.017 and KTAG V7.020 both are universal Petrol & Diesel car/truck/tractor/motorcycle ECU Chip Tuning tools. But KESS V2

KESSV2 is a ECU programming tool that is perfect for OBD use,while KTag is perfect for Jtag, BDM and all the Boot application (tricore and