How to Use 2M2 Tank Magic Automatic Car Key Cutting Machine?

2M2 Magic Tank car key cutting machine is the update version of V8/X6,you can use mobile phone to operate key cutting proceed as Xhorse Dolphin.

1

 

 

2M2 Magic Tank Cutting Machine Support Vehicle List:

Europe:

For ALFAROME, For AUDI, For BMW, For CITROEN, For FERRARI, For FIAT, For FORD-EU, For HOLDEN, For IVECO, For JAGUAR,For LANCIA, For LAND ROVER, For LDV, For MAN, For MASERATI, For MERCEDES-BENZ, For MINI, For OPEL, For PEUGEOT,For PORSCHE, For RENAULT, For ROVER, For SAAB, For SEAT, For SKODA, For VAUXHALL, For VOLKSWAG, For VOLVO

 

USA:

For BUICK, For CADILLAC, For CHEVROLE, For CHRYSLER, For DODGE, For FORD-USA, For HUMMER, For LINCOLN, For MERCURY

 

Japan & Korea:

For ACURA, For DAIHATSU, For HONDA, For HYUNDAI, For INFINITI, For KIA, For LEXUS, For MAZDA,For MITSUBIS, For NISSAN, For SSANGYON, For SUBARU, For SUZUKI, For TOYOTA

 

How to Change Cutter and Probe for 2M2 Tank Machine

Rotate the handwheel to move the middle clamp to the left.

2

Let the middle clamp completely against the left clamp

3

Insert the cutter/probe to the top

4

Let the middle clamp completely against the left clamp

5

Loosen the fixing screw of the probe.pull the probe down until the clamp platform,then tighten the screw to complete the operation

6

Pull the probe down until it touch the clamp platform,then tighten the screw.

7

 

How to Fix Key on 2M2 Key Cutting Machine Clamp

162-T Key:

Please set the key embryo in the left side

8

Let the front end of the key close to the first slot and does not exceed it.

9

The key remains level on the platform and clamp it

10

 

FLAT Key

Please set the key embryo in the right side

12

Left the front end of the key close to the first slot and does not exceed it

13

The key remains level on the bottom and clamp it

11

 

FLAT Key Shoulder:

Use the stop and insert it to the right slot

14

Block the key shoulder and clamp it.

15

 

HU64 Key:

Use an HU64 clamp,insert the key and then tighten the screws

16

Set the HU64 clamp to the bottom of the clamp in the right side and clamp it

17

Attention,the HU64 clamp must be against this side

18

 

 

HU66 Key

Please set the keyembryo in the right side

22

Block the key shoulder with the edge of the clamp

20

The key remains level on the bottom and clamp it

21

 

LASER Key

Please set the keyembryo in the left side:

22

Let the front end of the key close to the first slot and does not exceed it

23

The key remains level on the bottom and clamp it

24

 

Laser Key Shoulder:

Use the stop and insert it the left slot

25

Block the key shoulder and clamp it.

26