OEM Tango Programmer Software Version:
Firmware version :V4.8;
Software version:V1.111
Supported languages: English.
We have original Tango Key Programmer with Basic Software.
https://www.obd2tool.com/goods-1726-Tango+Key+Programmer+with+Basic+Software.html
Here is the procedure to program the key for Mercedes AXOR Truck:
i.e 2005 Benz AXOR truck
Read and save 93c86 eeprom dump data with Orange5 programmer
Open Tango key programmer
Select Car Model->Mercedes Benz->Trucks->Axor-> pre-2011(93C56, C66, C86)
Select Transponder Type-> Megamos 13
Put transponder/chip into Tango, read 10-digit transponder data: 15 0D DC C8 36
Select Car Model->Mercedes Benz->Trucks->Axor-> pre-2011(93C56, C66, C86) again
Upload dump data read by Orange 5
Select a unused key position and write key
Select transponder type: MEGAMOS 13
Tango has created the new file
Save data.
Upload the new file to the immobilizer memory to complete key making
Run Orange5 software, select eeprom type: 93C86
Open new key file
To create more keys use the new file.
Open VVDI Mini Key Tool Xhorse App
Select Special Function->Set type of VVDI super transponder-> Set as ID13
Manually enter transponder ID that read from Tango programmer above
set chip ID ok
Go to Transponder Clone
Put the transponder into vvdi mini key tool’s coil to detect
The chip ID is successfully changed.
Now the transponder will start Axor truck.
Done.