GM Tech II Software Listing :
GM
GM-English 33.004 1991-2014
GM-Spanish 33.002 1991-2014
GM-Germany 32.007 1991-2013
GM-Japanese 32.006 1991-2013
GM-French 32.007 1991-2013
GM-Italiana 32.007 1991-2013
GM-Portuguese 32.002 1991-2013
GM-Korean 32.002 1991-2013
GM-China 32.002 1991-2013
OPEL
OPEL-English Newly Update to V180 1997-2014
OPEL-Italian Newly Update to V180 1997-2014
OPEL- Polski Newly Update to V180 1997-2014
OPEL- German Newly Update to V180 1997-2014
OPEL- Turkish Newly Update to V180 1997-2014
GM Tech2 Card Opel Software Update to V180 Support Cars from the Year 1997 to 2014
SUZUKI
SUZUKI-English V01.210.020
SAAB
SAAB-English V148.000
ISUZU
ISUZU-English CAN-BUS V180 2006-2015 (CAN-BUS support car models after 2010)
ISUZU-English K-Line V11.680 1996-2014 (K-line support car models from 1996 to 2014)
Holden
Holden-English V149.000 1999-2013 (For North American Area Only)
Holden-English V147.000 1999-2012 (For Australia)
Please note:
It Can Only Support 12V Cars, No Trucks
How to program the Central Control Module (CCM) with GM Tech2 Tech II Scanner?
Tool:GM Tech2
Models: 1994-1996 Chevrolet Corvette
Condition/ Concern:
The following process should be used to program a service (replacement) Central Control Module (CCM) on a 1994-1996 Corvette.
It may be found that the option F0 : PROGRAM CCM is not available on the Tech I.
Recommendation/Instructions:
Note: The PCM must be programmed prior to programming the CCM if both have been replaced.
Program PCM
Remove class 2 line from DLC pin position number 2.
Install Tech 2 and request information from the vehicle, download PCM calibration from TIS to the Tech 2 and then upload to the vehicle.
Reinstall class 2 line to the DLC.
Program CCM
Install the Tech 1 with VIM cable adaptor P/N 3000091.
Select programming, model year, 4th digit of the vin, select the module (CCM), Program CCM, select location (North America), enter the rest of the vin, select transmission type, odometer select (miles or kilometers), enter odometer reading, programming is complete.
Note: Tech1 adaptor TA02149 will only work on the 12 pin DLC connectors that are typically found on model year 1993 and prior.