As Nitro Mechatronics, we perform meticulous operations such as removing Adblue, EGR and DPF with your CAT ET diagnostic tool for your Cat construction machinery and other vehicles with CAT engines.
What do you have to do to perform these operations? We perform the above operations through the OBD on the CAT vehicle. All you need is a CAT ET diagnostic tool and a computer with an internet connection. If you have all of these, we carry out these procedures in a professional manner.
What do you have to do during the procedure? What you have to do during the procedure will be explained to you step by step.
What should you do after the procedure? If the error lamp is still on after the procedure and the error is hidden in the ECU, then you need to clear this error. If the vehicle has torque limitation or limp home mode is active, these will be cleared. Since the sensors in the exhaust system are no longer required, you can remove them. Since the Adblue system is deactivated, you no longer need to use Adblue. This service that we provided as Nitro Mechatronics is under our guarantee: as long as you do not make any changes to the flash file after the operation we have performed, the operation will run smoothly, but if you make any changes the guarantee of the operation will be void . Another case that violates the warranty is the replacement of the control unit.
What brand can AdBlue be sold from? In Cat engine machines; asphalt machine, construction machine with backhoe loader, cold planer, bulldozer, dumper, excavator, grader, bekoloader, skid, vibrator, rock drill, forklift construction machines with Cat engine; Atlas Copco, Bomag, Furukawa, MOW, Prinoth, Sandvik, VermeerCAT vehicles; 12M2 Motor Grader, 140M2 Motor Grader, 160M2 Motor Grader, D6T Crawler Tractor, D7E Crawler Tractor, D8T Crawler Tractor, D9T Crawler Tractor, 312E Excavator, 314E Excavator, 316E Excavator, 3186E Excavator, 320E Excavator, 324E Excavator 329E Excavator,336E Excavator 336F excavator, 349E excavator, 349F, excavator