Question:
I have a MAN TGA 2005 year with FFR. I need to write a new transponder to start the truck but i can’t find the eeprom on the FFR and does not have proper tool to do it.
Any help?
Answer:
Here’s demo guide on MAN truck key programming including eeprom location and tools suggestion.
Model: MAN truck 2005 year
Device required:
Orange5 to read dump
Tango key programmer or TMPro2 to write key (TMpro2 require software license)
Transponder key compatible with TGA truck
Remove ECU
Front side of ECU
Back side of ECU
Find eeprom IC 95256 and clean IC carefully
Remove IC at your own risk.
Solder IC chip to Orange5 adapter
and connect adapter with Orange 5
Open Orange5 software, select M95256-V
Read IC95256 32Kx8 and save with any name
In Tango software, select Car Model->MAN->TGA (25128, 25256, MEG13)
Upload dump
Select any position for add key
Insert key into Tango key programmer
Write key success
No need to write new file
Solder IC back to ECU
Test the new key.
Done.