CAT ET Caterpillar Engine Injector Solenoid and Valve Actuator Test

The CAT ET (Electronic Technician) provides functionalities to test the operation of injector solenoids and intake valve actuator solenoids for Caterpillar engines. These tests help identify wiring or solenoid issues. This guide explains how to perform these tests and analyze the results.

Related Content:

• Caterpillar CAT ET 2024A Software
• CAT Communications Adapter 3

Accessing the Tests:

1. Injector Solenoid Test:
   • Navigate to the Diagnostics menu.
   • Select Diagnostic Tests.
   • Choose Injector Solenoid Test from the submenu. The test screen will appear.
2. Intake Valve Actuator Solenoid Test:
   • Navigate to the Diagnostics menu.
   • Select Diagnostic Tests.
   • Choose Suction Valve Control Solenoid Test from the submenu. The test screen will appear.

Test Screen Layout:

• Tree Area:
  • Lists the available ECMs and the selected diagnostic test.
  • Highlights the selected test if multiple tests are available.
  • Note: The Tree Area is not available for the Injector Magnetic Field Test over an ATA Data Link.
• Display Area:
  • Cylinder/Description: Lists available cylinder numbers.
  • Mode: Displays the current mode of the cylinder (e.g., “On” or “Off”).
  • Test Result: Displays results as “Open,” “Short,” or “OK” once the test is complete.
• Buttons:
  • Change: Changes the state of a cylinder, allowing for troubleshooting by turning individual cylinders “Off” and then on again.
  • Power All: Returns all cylinders to the “On” or “Active” state.
  • Shutdown All: Changes the state of all cylinders to “Shutdown.”
  • Start: Initiates the test. This button remains disabled until the test is stopped.
  • Stop: Stops the test. This button remains disabled until the test is resumed.

Performing the Tests:

1. Injector Solenoid Test:
   • Select the Injector Solenoid Test from the diagnostic menu.
   • Click Start to begin the test.
   • Observe the results in the Display Area.
   • Analyze the data to determine if all cylinders are operating properly.
2. Intake Valve Actuator Solenoid Test:
   • Select the Suction Valve Control Solenoid Test from the diagnostic menu.
   • Click Start to begin the test.
   • Observe the results in the Display Area.
   • Analyze the data to identify any issues with the intake valve actuator solenoids.

By following these steps, you can effectively diagnose and troubleshoot injector solenoid and intake valve actuator solenoid issues using the CAT ET. This process helps ensure that all cylinders are functioning correctly, contributing to the optimal performance of your Caterpillar engine.