AUTEL G-BOX Mercedes All Key Lost BMW DME Reading Usee with both the Autel MaxiIM IM608, IM508 and Auro IM600.
Continue reading
Author: Vivian
Feedback from Our Customers on Volvo Vida Dice 2014D
Volvo Vida Dice Description: 1.DICE – Diagnostic Communication Equipment, is a tool that is used together with VIDA all-in-one to
Continue readingHow to save and write ECM data for Nissan Sentra 2014 with Launch X431 Torque?
Nissan Sentra ECM Data Save & Write by Launch X431 Throttle: First select “Nissan” To confirm the software select “OK”
Continue reading
Instruction about Reading and Writing on Volvo GPT vehicles with KTAG ECU Programmer.
This is a Ktag help file used for Volvo Bosch EDC17 on GPT vehicles. To use this protocol of
Continue reading
How to read & decode BMW CAS4 5M48H with XPROG-M Programmer?
This article shows the procedures on reading & decoding BMW CAS4 5M48H with XPROG-M Programmer. Procedures: Remove BMW CAS4 module and get
Continue readingHow to change the Security Alarm setting on a 2014 Nissan Sentra by Launch X431 Throttle?
Change Security Alarm Setting for Nissan Sentra 2014: Connect Launch X431 Throttle to Nissan Sentra OBD port,the enter menu to
Continue reading
Review for Mercedes BENZ C6 Xentry diagnosis VCI DOIP &AUDIO Pass Thru Multi Benz Diagnostic Tool
Mercedes BENZ C6 XENTRY Diagnosis VCI: The adapter is 1:1 as original,looks like original,but inside is different.It has replaced outdated
Continue reading
Installation and Coding Introduction for BMW ENET (Ethernet to OBD) Interface Cable E-SYS ICOM Coding F-Series
Coding is for people who want to play with the settings of BMW car software to achieve something more desirable.
Continue reading
How to Set WiFi for MB SD Connect C4 PLUS DoIP?
New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting
Continue reading
Autel G BOX Benz & BMW Adapter Supports Benz All Keys Lost for Autel IM508 IM608
Autel G BOX is a new adapter to works for Auetl MaxiIM IM608 and IM508 with XP400 adapter (also works
Continue reading
How to choose GM Diagnosctic Scan Tool: GM Tech 2 or MDI or MDI 2? GDS1 or GDS2?
Here’s an info about the General Motors scan tools, including discussion of the Tech 2, MDI and current GDS 2.
Continue reading
Feedback from customers who bought VXDIAG VCX NANO Multiple GDS2 and TIS2WEB Diagnostic/Programming Tool
Ok, so I had a 4.0+ amp draw since I purchased the car, problem is I thought it was
Continue reading
Newest Update for OBDSTAR X300 DP PLUS PAD2
OBDSTAR X300 DP PLUS PAD2 is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from
Continue reading
User Manual for Autel XP400 Adapter Used with Autel IM608 to read/write transponder
The XP400 key & chip programmer is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone
Continue reading
Where to download SDD Pathfinder Software and Driver for JLR DoIP VCI?
The NEW JLR DoIP VCI is the newest interface for Jaguar and Land Rover vehicles.Here you can download software and
Continue reading
How to Replace TP Screen on Autel MaxiSys Diagnostic Scanner Tablets?
Here’s the important notes on replacement of new supplier’s TP Screen on Autel MaxiSys Tablets. Part Number of new
Continue reading
Xhorse VVDI MINI KEY TOOL Remote Maker from 2.3.5 Firmware is Global Version for Customers
One user’s Feedback: Just heads up – do not upgrade Key Tool!! I confirmed from few sources – they already
Continue reading
How to install OTC GTS IT3 and activate the software?
This article shows how to install OTC GTS IT3 software,and activate it. 1.Install “Techstrem_Setup” 2.Install OTC_VIM_Updater Go
Continue reading