This instruction show you guide on how to use Autel MaxiIM IM608 to perform all key lost programming for Chevrolet Volt 2015.
Procedures:
Build connection between Autel IM608 and Chevrolet Volt.
Enter menu to select “GM”–>”Manual Selection”(Auto SCAN Also Work)
Select “Chevrolet”–>”USA”–>”Volt”–>”2014-2016 Smart Key”
Select “Read Immobilizer Password(BCMAUTO)”–>”Password Reading”
Please switch the ignition on,then press “OK” to continue
Then it will read the PIN code:1392
Back to menu “Keyless System(CAN)”–>”All Smart Keys Lost”
Now please switch hazards on,and press “OK” to continue
Place the smart key to be learned into the slot and take other keys out of the vehicle.The key slot is usually:
1.In the armreset box
2.Under the bottle rack
3.Besides the ash tray
4.In the glove box
Then it will ask you to input the PIN code,read before:1392
Autel-IM608-All-Key-Lost-Programming-for-Chevrolet-Volt-2015-10
Just follow the screen prompt instruction to operate:
Press the Start/Stop button once,press “OK”
The current key is complete the matching.
Do you want to match the next key?
Press “Yes” to do next key programming
Repeat the step
Press the Start/Stop button once,press “OK”
The current key is complete the matching.
Do you want to match the next key?
Press “No”
Please switch the ignition off
Please press and hold START/STOP button for 12 seconds,the it will prompt you release
Now follow to long press the START/STOP button to turn the ignition on until the instrument light illuminates.
Switch the ignition off
Step on the brake,press the START/STOP button to start the engine and wait for 5 seconds
Switch the ignition off
Turn off the engine
Open and close the driver door
Remove the smart key,press the lock and unlock buttons simultaneously,and then release both.
Matching complete.
Done!