V39.07 CK200 Auto key programmer is the newly updated version of CK-100 key programmer.The high-quality CK200 car locksmith tools with RFID copier adapter increase much more features and functions like meter, maintain, gasbag, remote,immo and some other special features, without tokens limitation.Ck-200 key programmer supports multi-brand vehicles and can update.
5 Steps to Update CK200 key programmer:
1. Install the CK200SETUP, run it, then click <Drive> for driving
2. For the first time, please install the driving.
3. Click <LOAD> to load the renewed data file.
4. Click <RENEW> to renew, after it finished, click <OK>.
5. PULL the ck 200 programmer out of PC, connect power, examine Version info.
How to use CK-200 auto key programmer to make new car keys, It is use friendly according to CK200 key programmer V38.03 user manual, this user manual of CK-200 will guide you how to use ck-200 key programmer.
the operation guide of CK-200 key programmer.
Firstly, Prepared two keys, one key can start the engine, another one cannot (blank key) and connected cable to the device.Secondly, Connected CK200 auto key programmer v45.6 device into the OBD socket.Next, Turned on CK-200 pin code device.
Following was selecting car model according to CK-200 key programmer instructions.
Then, Inserted a key and turned the console.Turned ignition on then removed the key.After that, allowed to add a blank new key while left ignition off.Waiting for 45 seconds (max 60 seconds) until the safety access procedure was completed.Finally, blank key has been stored. Tried the second key and the engine can be started by the end.