2019 VESPA GTS 300SUPERTECH DATA BUFFER RESET

Background

Background: Different motorcycle models equip with some control units to monitor over the abnormal behavior of the control unit and its sensors. The equipped control units have a memory area and a special program for recording the behavior of a series of sensors. When this memory area is full, fault codes P0611 and P1607 may appear in diagnosing, indicating its data buffer needs to be reset.

Maintenance Tips

Maintenance Tips: A 2019 VESPA GTS 300SUPERTECH showed fault code【P1607 data buffer – unreasonable signal】. It means its memory area is full and the ‘data buffer reset’ function needs to be performed.

Note: It is recommended to carefully check the components of the injection system first, because the data saturation is a symptom of faulty connections with injection system components.

Preparation

Preparation: MS80, M001A, M041/N041

Tips

Tips: It is recommended to execute【Data buffer reset】when fault codes P0611 and P1607 are read out, and the vehicle engine should remain in a non-starting state when this function is executed.

Solutions

Solutions: using OBDSTAR MS80 to operate on【Data buffer reset】.

Details Steps:

①Connect MS80 to Motorcycle, enter into【MOTO DIAG】;

②Click【All】, input letters such“VESPA” in search bar, click【VESPA】;

Tips: by searching keywords, find out related models quickly.

③Click VESPA latest version;

④Click【Diagnosis】,【GTS】,【300 SUPERTECH】;



⑤Click【ENG】;

Tips: can click【Diag Socket】or【Diag Connector】check diag socket or cable information.

⑥Click【MARELLIIAW MIUG4】;

⑦Click【Advanced Function】;


⑧Click【Agree】;

⑨Input 12345678, click【Enter】;

⑩Click【Data buffer reset】;

⑪When executing this function, the engine must be off!

Note: No operation is needed, it will automatically jump to the next step when the engine off is detected.

⑫Data buffer reset done;

⑬【P1607 data buffer – unreasonable signal】fault code removed.

Summary

Pls strictly follow your device tips in your operation process.